I have gotten the opportunity to start working for northern.tech, the commercial entity behind the Mender project. Before I start writing about my relationship with Mender I wanted just link to Northern.tech culture blog, to give you an idea of the company culture which is always a deciding factor for me when choosing an employer and there are some interesting ideas in the posts that might inspire you and your company.
I have been a community member of the Mender project since 2016, doing various things. It started out with me adding support for the popular Raspberry Pi boards. The initial reference boards where Beaglebone Black and qemuarm, I did not have a BBB board at the time but I wanted to try Mender out, so of course you port it to what you have laying around on the desk. Now days the the Raspberry Pi 3 is one of the official supported boards and the entry point for many to the project.
Another contribution worth mentioning that I did during my time as a community member, was to add support for updating UBI volumes on raw NAND based devices. Initially Mender only supported block based devices, that is eMMC/SD. Should be noted that I only did the initial UBI work, this was later picked up by the project and integrated in QA/CI and became officially supported.
I have enjoyed following the projects from it early days and been part of the community as it has grown and I look forward to continue being part of it now as an employee.
Going from a community member to employee, it makes sense to focus on tasks that will enable the community even further and one of the first things that I am looking at and that we have planned is to a take look how we can improve community integration of boards. The goal with this is:
- Better overview of board support
- What boards are supported?
- What is the status of the integration
- Easier to get started on one of the supported boards
- Easier to contribute support for your board
You can follow this work here:
Feedback is always welcome, so please join the discussion. I really hope that we can collaborate on this.
I would also like to extend a thank you to my previous employer Endian Technologies AB. I have really enjoyed working here and we part ways on the best terms I believe. I have always felt the support of the company and of my colleagues for all my idea and endeavors. If you are looking for a job in Gothenburg, Sweden, they now have a slot to fill :).
Looking ahead of what will happen regarding posts on this site, I will probably pause the article series that I have started on software updates solutions, since now I am getting paid working a specific project. I do believe that I could continue this without being effected by that, but I also want to write about other things. I have not decided what yet. It will probably be more Yocto focused posts and probably more stuff about hardware.
For more technical insights about Mender take a look at one of my previous posts:
– Updating Embedded Linux Devices: Mender.
You’ll be sorely missed, Mirza! Good luck and hope to see you again 😊
Thanks Benjamin. I miss you already, when is that AW happening? 🙂
Tomorrow if you’re up for it! I left my wife and kids on an island 130 km up north and will therefore be spending the evening inebriated. I just asked the guys on Slack, Joakim is up for it as well.
Congratulations Mirza! Sounds like the perfect job for you!
You will be missed! But i think your new job will be a great fit for you!
Hope you’ll drop by and say hi.
Thanks and of course. I think I forgot my pink water bottle 😉